Hoover UH72400 Manuel du propriétaire télécharger pdf (Page 23)

CYCLONIC FILTER ASSEMBLY: How to Clean

4.11

4.12

Remove dirt cup as described in Fig. 4.5.

4.11 Lift the filter assembly (A) up out of the dirt cup.

4.12 Dirt and debris can be cleaned from the filter

assembly with the dusting/ upholstery tool.

4.13 Place the filter assembly (A) in the dirt cup,

aligning the D-shaped tab on the top of the dirt cup.

Press down firmly to place the filter assembly back

in place. Replace dirt cup lid.

Replace dirt cup as described in Fig. 4.4.

4.13

BRUSHROLL: How to Clean

4.14 Turn vacuum over so bottom side is facing up.

Remove any debris and/or hair from brushroll.

For additional maintenance required for belt or

brushroll please contact a HOOVER

service provider

at 1-800-944-9200.

4.15 Vacuum is equipped with an automatic

brushroll shut off in event of overload or jam.

4.16 To reset the brushroll, press the ON/OFF

Brushroll switch OFF. Then press the ON/OFF

Brushroll switch again to ON. After resetting the

brushroll may still be blocked. Check for obstructions

in the brushroll area and remove any obstructions.

4.14

4.15

4.16

CAUTION

! !

To reduce the risk of injury from moving parts

- Unplug before servicing.

To reduce the risk of personal injury - Unplug

before cleaning or servicing.

WARNING

! !

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 47 48

Pas de commentaire

Hoover UH72400 Manuel du propriétaire Page 23